Menu Close
Manual hi-flow pump hydraulic

Hi-Force HP245 High Flow, Two Speed Manual Hydraulic Pumps

HP Steel Pumps manuallly operated from High Force

The HP245 range of high flow, two speed, manually operated pumps is ideally suited for applications where high tonnage cylinders are to be used on sites, without any available electric or compressed air power supply.

Category:

The HP245 range of high flow, two speed, manually operated pumps is ideally suited for applications where high tonnage cylinders are to be used on sites, without any available electric or compressed air power supply. Both models are suitable for working pressures up to 10,000psi (700 Bar) and the very high, low-pressure displacement (6.89 in³ per stroke), enables fast piston extension (and retraction) under no load. These high-performance pumps are also ideally suited to multiple cylinder lifting applications where a larger volume of oil is required to complete the job. Available with a 2-way valve for single acting cylinders or a 4-way valve for double acting cylinders, both models are supplied with a pre-filled 10-litre oil reservoir and are ready for immediate use.

  • Durable steel construction,
  • Factory set safety relief valve,
  • Changeover pressure 406 psi  (28 Bar),
  • Low handle effort characteristics,
  • 2.64 USgallons (10 litres) of usable oil capacity.

diagram and

SPECIFICATIONS

Standard

MODEL NO. VALVE TYPE DISPLACEMENT PER STROKE INCH3 USABLE OIL CAP. USGALLONS HANDLE EFFORT LBS MATERIAL WEIGHT LBS
1ST STAGE 2ND STAGE
Two speed hand operated pump for single acting cylinders and tools
HP245 2-way 6.89 0.24 2.64 88 Steel 65.0
Two speed hand operated pump for double acting cylinders and tools
HP245D 4-way 6.89 0.24 2.64 88 Steel 68.3

Dimensions in inches

MODEL NO. A B C D E F G H I J K L M
HP245 16.55 7.09 4.89 0.59 41.37 7.88 2.48 1.85 27.58 15.37 8.08 6.82 10.64
HP245D 16.55 7.09 4.89 0.59 41.37 7.88 2.48 1.85 27.58 15.37 8.08 6.82 10.64

Metric

MODEL NO. VALVE TYPE DISPLACEMENT PER STROKE CM3 USABLE OIL CAP. LITRES HANDLE EFFORT KG MATERIAL WEIGHT KG
1ST STAGE 2ND STAGE
Two speed hand operated pump for single acting cylinders and tools
HP245 2-way 113 4 10.0 40.0 Steel 29.5
Two speed hand operated pump for double acting cylinders and tools
HP245D 4-way 113 4 10.0 40.0 Steel 31.0

Dimensions in mm

MODEL NO. A B C D E F G H I J K L M
HP245 420 180 124 15 1050 200 63 47 700 390 205 173 270
HP245D 420 180 124 15 1050 200 63 47 700 390 205 173 270

Related products